Install Bitcoind Ubuntu · GitHub

Aeon

Aeon (AEON) is a private, secure, untraceable currency. You are your bank, you control your funds, and nobody can trace your transfers.
[link]

Trying to get bitcoind -daemon to run on startup Ubuntu 17.04 /r/Bitcoin

Trying to get bitcoind -daemon to run on startup Ubuntu 17.04 /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Distortion with a Focusrite Scarlett Solo (3rd Gen)

EDIT2: I can find no pattern to this mind numbingly frustrating problem. Switching back and forth between devices and sample rates in Reaper is not solving the problem now. I have no clue what does it.
EDIT: Just FYI, it looks like changing the sample rate in /etc/pulse/pulse/daemon.conf didn't actually solve it, though it's only just happened for the first time in a long time. I did find that going BACK to ALSA in Reaper, changing the sample rate there, and then switching back to Pulse (still in Reaper) fixed it at least this time though, so anyone who comes across this can try that.
I'm running Ubuntu 20.04. I often deal with very fuzzy distortion from my Scarlett Solo audio interface (EDIT: the distortion is on the output, not the input). Sometimes I don't notice what causes it to start, but it does seem to have several causes. For example, Opening up PulseAudio Sound Control or opening/closing Reaper can cause it to start, and there doesn't seem to be a way to fix it besides restarting. Looks like it only affects PulseAudio, since selecting ALSA as my driver in Reaper does eliminate the distortion in Reaper, but I'm still stuck with the distortion everywhere else until I restart.
Here's what it sounds like:
https://www.youtube.com/watch?v=4oPbP1vOIcE
(Original video for comparison, though I don't think you'll need it)
If I try to record the output to OBS, I get undistorted audio in the recording.
Any idea what's going on here, and how to prevent it?
Potentially relevant information:
This has happened regularly for a long time. Sorry if that makes it harder to diagnose. I just haven't had the energy to look into it until now.
I started with Ubuntu Studio 18.04. (This comes with JACK, and maybe there's a conflict there? I'm a terrible linux audio user, because I still haven't really figured out JACK.)
When I first installed the OS, I followed some tutorials to set up Ubuntu for Audio. (Many of the things were, apparently, not already set, even with Ubuntu Studio.) Unfortunately, I couldn't tell you what all I did. (It was a while ago, before I had the interface, iirc.)
Also, while I realize it wouldn't really come close to compensating folks for their time and effort, I'd love to tip a few dollars of Bitcoin Cash to anyone who can help me here, at least to show that I appreciate and value that time and effort. And of course, please feel free to point me towards required reading, or ask for more info I should provide. Thanks in advance!
Ubuntu 20.04
Xfce
GTX 2070 Super
GA-970A-UD3P
AMD 8320
Focusrite Scarlett Solo (3rd Gen)
submitted by AD1AD to linuxaudio [link] [comments]

txindex=1 server=1 question (node, rpc)

Edit: solved! Just needed to wait for indexing to catch up
Hi all I'm trying to use btc-rpc-explorer
https://github.com/janoside/btc-rpc-explorer
I have a full node via bitcoin qt. Can I use qt for block explorer?
I launch block explorer and I'm getting rpc error. The webpage states "check rpc connection info"
The github project states I need server=1 and txindex=1. Can I make qt run with these settings? I tried adding them to the .conf but how can I confirm qt is running with these options, in console somehow?
In case I can't use qt for this I downloaded bitcoind. It looks like I can start the daemon with txindex=1 and server=1 but still getting same connection problem with btc-rpc-explorer.
Do I have to do -reindex=1? Can I do that within qt? If not and I use bitcoin cli will it disrupt qt in any way?
Thanks
Edit: this is on Ubuntu
submitted by redditor157b to Bitcoin [link] [comments]

GUI wallet and Ledger nano isn't what I thought

So I use the hardware wallet to hold bitcoin mainly, but I thought it'd be a good idea to store Monero on it. Anyway I noticed that GUI desktop wallet doesn't integrate well with it. I dealt with frequent crashes, so I'm forced to force stop the program. It doesn't always happen, but frequently it does. I had to opt for simple mode, because I don't have enough space. It also bothered me that the balance is aways in XMR and doesn't show fiat currency even when I tweaked the settings. Also, daemon takes a long time to start and stop. I understand this is required whether I connect to a local or remote node, but it made me appreciate the hot wallet more. I really prefer to use Ledger for all my cryptos (I only buy specifc ones), but GUI wallet and Ledger nano s don't provide seamless experience. I've been wondering why they don't have a Monero app like the Bitcoin and other cryptos? Anyway, if anyone has a different experience, please do tell. If Monero team improve the software, I'll definitely start using it, but right now it's better to use a hot wallet for Monero. By the way, I'm running Ubuntu 20.04.
submitted by Amasa7 to Monero [link] [comments]

Running a Bitcoin node on a $11.99 SBC

Running a Bitcoin node on a $11.99 SBC
Just wanted to let you guys know that I'm successfully running a (pruned) Bitcoin node + TOR on a $11.99 single board computer (Rock Pi S).
The SBC contains a Rockchip RK3308 Quad A35 64bit processor, 512MB RAM, RJ45 Ethernet and USB2 port and I'm using a 64GB SDCard. It runs a version of Armbian (410MB free). There's a new version available that even gives you 480MB RAM, but I'm waiting for Bitcoin Core 0.19 before upgrading.
To speed things up I decided to run Bitcoin Core on a more powerful device to sync the whole blockchain to an external HDD. After that I made a copy and ran it in pruned mode to end up with the last 5GB of the blockchain. I copied the data to the SD card and ran it on the Rock Pi S. After verifying all blocks it runs very smoothly. Uptime at the moment is 15 days.
I guess you could run a full node as well if you put in a 512GB SDcard.
The Rock Pi S was sold out, but if anybody is interested, they started selling a new batch of Rock Pi S v1.2 from today.
Screenshot of resources being used
Bitcoin Core info
Around 1.5 GB is being transferred every day
---
Some links and a short How to for people that want to give it a try:
  1. This is the place where I bought the Rock Pi S.
  2. Here you find more information about Armbian on the Rock Pi S. Flash it to your SDCard. Follow these instructions.
  3. Disable ZRAM swap on Armbian. If you don't do this eventually Bitcoin Core will crash. nano /etc/default/armbian-zram-config ENABLED=false
  4. Enable SWAP on Armbian sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile sudo swapon --show sudo cp /etc/fstab /etc/fstab.bak echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab
  5. Set up UFW Firewall sudo ufw default deny incoming sudo ufw default allow outgoing sudo ufw allow ssh # we want to allow ssh connections or else we won’t be able to login. sudo ufw allow 8333 # port 8333 is used for bitcoin nodes sudo ufw allow 9051 # port 9051 is used for tor sudo ufw logging on sudo ufw enable sudo ufw status
  6. Add user Satoshi so you don't run the Bitcoin Core as root sudo adduser satoshi --home /home/satoshi --disabled-login sudo passwd satoshi # change passwd sudo usermod -aG sudo satoshi # add user to sudo group
  7. Download (ARM64 version) and install Bitcoin Core Daemon
  8. Download and install TOR (optional). I followed two guides. This one and this one.
  9. Create a bitcoin.conf config file in the .bitcoin directory. Mine looks like this: daemon=1 prune=5000 dbcache=300 maxmempool=250 onlynet=onion proxy=127.0.0.1:9050 bind=127.0.0.1 #Add seed nodes seednode=wxvp2d4rspn7tqyu.onion seednode=bk5ejfe56xakvtkk.onion seednode=bpdlwholl7rnkrkw.onion seednode=hhiv5pnxenvbf4am.onion seednode=4iuf2zac6aq3ndrb.onion seednode=nkf5e6b7pl4jfd4a.onion seednode=xqzfakpeuvrobvpj.onion seednode=tsyvzsqwa2kkf6b2.onion #And/or add some nodes addnode=gyn2vguc35viks2b.onion addnode=kvd44sw7skb5folw.onion addnode=nkf5e6b7pl4jfd4a.onion addnode=yu7sezmixhmyljn4.onion addnode=3ffk7iumtx3cegbi.onion addnode=3nmbbakinewlgdln.onion addnode=4j77gihpokxu2kj4.onion addnode=5at7sq5nm76xijkd.onion addnode=77mx2jsxaoyesz2p.onion addnode=7g7j54btiaxhtsiy.onion ddnode=a6obdgzn67l7exu3.onion
  10. Start Bitcoin Daemon with the command bitcoind -listenonion
Please note that I'm not a professional. So if anything above is not 100% correct, let me know and I will change it, but this is my setup at the moment.
submitted by haste18 to Bitcoin [link] [comments]

All Usernames

Popularity Number Tried Usernames
1 root
2 admin
3 guest
4 supervisor
5 Administrator
6 user
7 tech
8 ubnt
9 default
10 support
11 service
12 888888
13 admin1
14 mother
15 666666
16 test
17 oracle
18 ftpuser
19 usuario
20 test1
21 test2
22 123456
23 test123
24 123
25 321
26 password
27 [email protected]
28 postgres
29 dev
30 testuser
31 tomcat
32 git
33 dspace
34 nexus
35 zabbix
36 teamspeak
37 ftpuser1
38 ubuntu
39 ts3
40 www-data
41 ldapuser1
42 minecraft
43 ghost
44 butter
45 redis
46 ts
47 teamspeak3
48 hadoop
49 tonyeadmin
50 pi
51 odoo
52 mysql
53 contador
54 cron
55 wp
56 ftp
57 weblogic
58 backup
59 ftp_user
60 ts3bot
61 1234
62 bin
63 student
64 user1
65 tom
66 ts3server
67 nagios
68 duni
69 test321
70 e8ehome
71 telecomadmin
72 db2fenc1
73 bitcoin
74 a
75 deploy
76 nginx
77 db2inst1
78 hdfs
79 abc123
80 jenkins
81 web1
82 dasusr1
83 operator
84 anonymous
85 csgo
86 camera
87 passw0rd
88 baikal
89 tplink
90 cssserver
91 tt
92 admins
93 tst
94 osmc
95 prueba
96 fulgercsmode123
97 y
98 odoo9
99 zookeeper
100 mahdi
101 wordpress
102 www
103 billing
104 111111
105 ftp_test
106 flw
107 b
108 redhat
109 steam
110 ohh
111 ops
112 abc123456
113 user8
114 ScryptingTh3cod3r~F
115 ts3user
116 centos
117 svn
118 user9
119 postgres123
120 vagrant
121 gituser
122 enable
123 elastic
124 user2
125 daemon
126 user3
127 walter
128 VM
129 havanaloca
130 csgoserver
131 demo
132 CUAdmin
133 servercsgo
134 css
135 spark
136 ftptest
137 data
138 localadmin
139 wangjc
140 ispadmin
141 1
142 adam
143 Accept-Language: zh-CN,zh;q=0.8
144 web
145 client
146 xuelp123
147 workpress
148 openssh-portable-com
149 cacti
150 zs
151 cubie
152 informix
153 Contact:
154 conf
155 hbase
156 ranger
157 msn
158 bot
159 spark1
160 radio
161 xc3511
162 pass
163 dev123
164 maven-assest
165 noah
166 linktechs
167 query
168 bot1
169 informix123
170 gzw
171 tss
172 NETBASE
173 es
174 oracle123
175 user123
176 mcserver
177 ftpadmin
178 linuxshell
179 app
180 optiproerp
181 wangshaojie
182 knox
183 org
184 nmstest
185 elasearch
186 Xinjiang
187 aticara
188 555
189 [email protected]
190 wwwdata
191 sh
192 jenkins123
193 henry
194 licongcong
195 crontab
196 oldbody
197 tez
198 122.152.213.96
199 zhang
200 Shaanxi
201 nobody
202 cf46e3bdb4b929f1
203 ethereum
204 aa
205 Jay123
206 ionhasbeenidle13hr
207 mysql-data
208 system
209 localhost
210 [email protected]
211 dzldblog
212 linuxprobe
213 bdos
214 raid
215 jira
216 zhouh
217 amx
218 wanjm
219 MPE
220 aaa
221 NISECTC5002
222 ec2-user
223 sandiego
224 iptv
225 shell
226 confluence
227 matthew
228 bizf
229 backupdb
230 hive
231 dell
232 tornado
233 zhou
234 blender
235 user0
236 c
237 @Huawei123
238 net
239 cat1
240 watch 'sh'
241 haohuoyanxuan
242 administrador
243 text
244 dell123
245 wybiftp
246 share
247 yanss
248 squid
249 kafka
250 db2as
251 PRODDTA
252 bitcoinj
253 user01
254 cc
255 [email protected]
256 12345
257 azureadmin
258 duanhw
259
260 zhangfei
261 easton
262 geoeast
263 lwx
264 ldd
265 aws
266 gv1
267 140.115.53.10
268 useradmin
269 tlah
270 walletjs
271 ccc
272 user4
273 solr
274 chef
275 python
276 GET / HTTP/1.0
277 12345678
278 customer
279 sss
280 geminiblue
281 ausftp
282 Chongqing
283 nologin
284 username
285 mining
286 user11
287 news
288 2
289 muiehack9999
290 user5
291 ubuntu123
292 docker
293 nexxadmin
294 wq
295 OPTIONS / HTTP/1.0
296 gpadmin
297 test5
298 kuangwh
299 nagios123
300 ams
301 gfs1
302 vsb_pgsql
303 140.238.189.155
304 carl
305 CONNECT ip.ws.126.net:443 HTTP/1.1
306 nvidia
307 wallet
308 [email protected]
309 3
310 db2fenc1123
311 user6
312 www1
313 andy
314 assest
315 OPTIONS / RTSP/1.0
316 azure
317 webftp
318 tab3
319 aliyun
320 smartworldmss
321 hcat
322 walle
323 zhangfeng
324 openlgtv
325 User-Agent: Go-http-client/1.1
326 wangw
327 kelly
328 usuario1
329 [email protected]#
330 x
331 Huawei1234
332 user7
333 sysadmin
334 video
335 tmp
336 GET /nice%20ports%2C/Tri%6Eity.txt%2ebak HTTP/1.0
337 dianzhong
338 clfs
339 wangk123
340 rsync
341 livy
342 xuezw
343 hduser
344 testing
345 HEAD http://123.125.114.144/ HTTP/1.1
346 bitcoind
347 matrix
348 cassandra
349 xx
350 F
351 backups
352 ktuser
353 barbara
354 sunxinming
355 OPTIONS sip:nm SIP/2.0
356 ftpuser123
357 michael
358 jiang
359 wangh
360 wolf
361 ikan
362 122.88.49.75
363 monitor
364 Proxy-Authorization: Basic Og==
365 pentaho
366 rootadmin123
367 wildfly
368 xxx
369 nobodymuiefazan123456
370
371 www2
372 serial#
373 From: ;tag=root
374 cat2
375 alice
376 robot
377 wowza
378 visitor
379 tab2
380 elasticsearch
381 gbase
382 motorola
383 superuser
384 User-Agent: Mozilla/5.01688858 Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/62.0.3202.75 Safari/537.36
385 sara
386 Jaydell123
387 linuxacademy
388 vps
389 xbmc
390 software
391 Call-ID: 50000
392 felix
393 portal
394 backupdb140
395 bdos123
396 greenplum
397 sshd
398 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,/;q=0.8
399 daemond
400 qwe123
401 webmaster
402 [email protected]#
403 web13
404 bpadmin
405 ligh
406 leo
407 Max-Forwards: 70
408 password123
409 vivacom
410 dbvisa
411 tab
412 mongo
413 ggg
submitted by Admir4l88 to Admir4l88Data [link] [comments]

Please set up your nodes to collect data for the stress test tomorrow.

Please make sure you have NTP or timesyncd installed and active, or another form of clock synchronization, and please enable debug=bench and do anything else you can think of to collect data on node performance.
The stress test is expected to be pretty big. The expected transaction throughput rate on this one is something like 250 tx/sec, which is likely to saturate ABC's net_processing code. It will be informative if we can collect some data on where exactly in the code the bottlenecks are. If you know how to compile from source, it would be great to compile bitcoind with profile symbols enabled (export CXXFLAGS="-pg -O2", I think, followed by "./bitcoind -daemon=0" -- profiling data won't be collected in daemon mode). Also, information on whether the UTXO cache and disk activity is the bottleneck will be helpful. Does dbcache=8192 help? If you have a ton of RAM, does cat ~/.bitcoin/chainstate/* >/dev/null help? (That would cache the DB at the OS level. Still uses leveldb, but no disk.) Do you see high disk tps with iostat? High iowait %?
Unfortunately, I'm extremely busy right now and won't have the time I wish I had to devote to this project, so if anybody else who has time who can make specific suggestions on how to implement the things above, that would be appreciated.
The thread for config options on the first stress test is here. Also, there's my writeup of the Sep 1st stress test results.
If any of you are running BSV nodes, please set those up for data logging too.
submitted by jtoomim to btc [link] [comments]

(Updated) [Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

Intro

This thread is an update to my first Reddcoin staking tutorial that was written 7 months ago.
 
The reason for the update
My Reddcoin Core software crashed and became unusable. My Raspberry Pi 3B would lag and freeze, I couldn't stake anymore.
 
Instead of just redoing everything the same way, I wanted to see if I could improve on 3 points:
 
The updates
 
If you would like to tip me
Writing a tutorial like this takes time and effort; tips are appreciated. My Reddcoin address: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
     

Overview

 

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Video

https://www.youtube.com/watch?v=Snr5e8bzftI
This video shows how long it takes to start Reddcoin Core.   TL;DR:
     

Extra

Backup
Backup your wallet to prevent losing the RDDs in your wallet! There are two methods to backup, do both. Make new backups if you create a new receiving address!
 
 
   
Boot with only 1 USB drive plugged in:
Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly.   If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
   
Connection issues If you have issues syncing the blockchain because you have 0 network connections, please follow the instructions in this thread.
   
Start Reddcoin Core easier
Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
   
Minimization options
Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
   
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
 
   
Chromium as browser: The updates break Firefox, the browser crashes when you try to run it. Install another browser, Chromium, to solve this issue.
   
Updates / Upgrades
If Software Updater shows up and tells you that there is updated software available, do not install the updates using Software Updater. Use LXTerminal to update Lubuntu.  
     

Credits:

   
Credits in previous tutorial:
submitted by Yavuz_Selim to reddCoin [link] [comments]

Getting frustrated with Ubuntu. Are my experiences the norm for a Linux user?

Let me start off by saying that I'm not a total newb, but still pretty green. I like to believe I'm capable with computers, and know enough to figure out most issues. I also have a pretty solid general understanding of how they function. Been a Windows user most of my life, but decided to make the switch to Linux a few years back.
My experiences thus far are making me reconsider the switch, despite the fact that I've really become opposed to using Windows. I'm curious if I should expect more of the same indefinitely, or if my experiences up to this point are unusual, and I should expect to reach a point where I can just use the OS, instead of spend hours trying to perform every task.
It all started when I downloaded Ubuntu about three years ago. I easily got it installed as a dual boot on a Windows machine. Had to start by allocating disk space in Windows for the new Linux install, prepared a live usb, went through the install, cake. Then I started trying to do stuff, like use a printer. Well HP doesn't make a driver for Linux and, probably, 2-4 hours of research led to me still not having a working printer. I found a driver, but the process to get it installed did not work as it was supposed to. I forget the specifics, but I followed a tutorial to the T, but ran into unforeseen installation issues, and never could figure out how to get the process complete.
After that I started running into issues with the FireFox browser. I've alwasy used FF on Windows with no issues. On Ubuntu it ran slower than dial-up from the mid-90's. Again, 2-4 hours worth of research and several changes to things like FF settings, disabling add-ons, etc., and I still had no fix.
Still I wasn't deterred. Then the dual boot broke. I tried boot repair. No dice. Tried for several hours to get it working. Asked about it on forums, sent in results of boot repair (where I forget) only to get no response, and finally I threw in the towel.
I also struggled to get Bitcoin Armory working, with some very frustrating success, but I didn't count that against Linux, since it was very new software, and I wasn't surprised it was buggy.
Fast forward to today. I've been using Windows for a couple years, with few attempts made to use Linux, except for trying to retrieve a very small amount of BTC from Armory, which consumed about three weekends of my life to finally achieve.
Now I've decided to give it another go. I downloaded UbuntuStudio b/c I'd like to use some of the music production software that comes with it.
Following some tutorials online, I tried to connect my midi keyboard to the computer using QJackCtl. I couldn't remember the issue that I ran into when starting to type this up, so I tried to repeat the process, only to have the program crash during start up, three times. The computer had literally just restarted 20 minutes ago, so I doubt a reboot would work, but maybe. It's almost funny at this point. I'm really disappointed that I can't get the audio software that came with the distro working "fresh out of the box." Maybe with a few hours, or weekends, worth of research?
I've also been getting a system error message every time I login. I posted a query on the Ubuntu forums. That issue has yet to be sorted out.
I hesitate to include this next part, because it involves software that is really still in it's early stages, and I'm trying to be realistic in taking the perspective that any problems I encounter are with the new software, not Ubuntu, but the fact that I had zero problems getting the same stuff to work in Windows just adds to my frustration with Ubuntu.
Everything I'm about to describe is involved with installing monero mining and wallet software. The exception is the AMD drivers needed for the GPU I'm using to mine. Those I expected to work without issue. I followed the directions for installing the AMD drivers for Ubuntu on the AMD website, and the program would not work. After, you guessed it, 2-4 hours of research, I finally, almost by accident, installed an older version of the driver software. Boom, it worked. WTF man?! When I installed the Windows version it took 2 minutes.
Moving on, I tried getting the xmr-stak mining software working. This took me several hours, spread over several days to sort out. Same with the monero-gui wallet, which actually I've only got half-way working. In fact, I've tried installing the monero-gui by two different ways. In the process I've inadvertently got the monerod daemon running, but not the gui. Actually, the monerod daemon starts with the computer and I haven't even started trying to figure out how to turn that off, since what's the point of having it run if I can't use the gui?
In Windows I had all of this up and running in a couple of hours. And in saying that I'm prepared for the "if you like Windows so much then use that!" or "you're just too thick to figure it out!", but I don't like Windows, and I don't think it's a matter of not figuring it out. It seems to me that the reason I've spent dozens of hours just trying to get things to work in Linux is that nearly every time I've tried to do something, there is inevatably some error along the way where following the directions isn't good enough, and sorting out the issue is a feat in and of itself.
I just want to know if this is unusual, or if this is how it's going to go forever if I keep using Linux. Is my experience typical?
TL;DR: I've had a litany of issues and spent countless hours trying to fix them using Linux. Is this rare, and I've just had an unusual experience, or actually pretty common, and I should just accept it as the cost of using an open source OS?
submitted by rtfioeti to Ubuntu [link] [comments]

Vertnode - An automated solution for installing Vertcoin node(s) on Single Board Computers

Hello Vertcoin Community,
Eager to contribute to the Vertcoin Community I began creating step by step walkthrough guides on how to get a Vertcoin node up and running on a Raspberry Pi, Raspberry Pi Zero and Intel NUC. Along with information to get a Vertcoin node up and running was also optional steps to install p2pool-vtc.
I decided that while this step by step guide might be helpful to a few, a setup script may prove to be useful to a wider range of people. I have this script to a point where I think it may be productive to share with a bigger audience, for those who are brave and have this hardware sitting around or like to tinker with projects; I invite you to test this setup script if you are interested, if you run into errors any sort of verbose console output of the error proves to be extremely helpful in troubleshooting.
The script was designed to produce a “headless” server... meaning we will not be using a GUI to configure Vertcoin or check to see how things are running. In fact, once the server is set up, you will only interact with it using command line calls over SSH. The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Why run a headless node on a Single Board Computer?
The idea is to have this full node be simple, low-power, with optimized memory usage and something that “just runs” in your basement, closet, etc.
Required: USB Flash Drive 6GB - 32GB
Please note that the script was designed for Single Board Computers first and looks for an accessible USB Flash Drive to use for storing the blockchain and swap file, as constant writing to a microSD can degrade the health of the microSD.
Supports

Hardware

All of the hardware listed above is hardware that I have personally tested / am testing on myself. The plan is to continue expanding my arsenal of single board computers and continue to add support for more hardware to ensure as much compatibility as possible.
Functionality
It is worth noting that LIT can be ran with multiple configurations, the ones displayed in the Post Installation Report reflect values that run LIT with the Vertcoin Mainnet. Please be aware that the Vertcoin Testnet chain has not been mined 100% of the time in the past, if you make transactions on the Vertcoin testnet that do not go through it is likely because the chain has stopped being mined.
BE CAREFUL WITH YOUR COINS, ONLY TEST WITH WHAT YOU ARE OKAY WITH LOSING IF YOU USE THE MAINNET.

Vertcoin Testnet Coins

https://tvtc.blkidx.org/faucet/
I've included some documentation on LIT I created which includes information I found to be useful: https://github.com/e-corp-sam-sepiol/vertnode/blob/mastedocs/lit.md
Please visit the mit-dci/lit github repository for the most up to date information on lit: https://github.com/mit-dci/lit

Vertnode | Automated Vertcoin Node Installation Script

https://github.com/e-corp-sam-sepiol/vertnode

Recommended: Use Etcher to install the chosen OS to your microSD card / USB flash drive.

If you intend on installing Ubuntu Server 16.04 to your Intel NUC please use Etcher to install the .iso to your USB flash drive.
https://etcher.io/
PLEASE NOTE THIS SCRIPT MAY GIVE AN ERROR. THIS IS THE NATURE OF TESTING. PLEASE REPORT YOUR ERRORS IF YOU WANT THEM TO BE FIXED/RESOLVED. THANK YOU FOR BETTERING THE DEVELOPMENT OF THIS SCRIPT.

Ubuntu Server 16.04 Setup Details

You can use different clients to ssh into your node. One option is using PuTTY or Git Bash on Windows which is included in the desktop version of Git. If you are using Linux you can simply open a new terminal window and ssh to the IP address of your node (hardware you intend installing the Vertcoin node on).
You will need to know the IP address of your node, this can be found on your router page.
ssh 192.168.1.5 -l pi For example, this command uses ssh to login to 192.168.1.5 using the -l login name of pi. The IP address of your node will likely be different for you, in this example I am logging into a Raspberry Pi which has a default login name of pi.
A brief list of commands that can be used to check on the Vertcoin node status:
vertcoin-cli getblockchaininfo | Grab information about your blockchain
vertcoin-cli getblockcount | Grab the current count of blocks on your node
vertcoin-cli getconnectioncount | Grab the current count of connections to your node. A number of connections larger than 8 means that you have incoming connections to your node. The default settings are to make 8 outgoing connections. If you want incoming connections please port forward your Raspberry Pi in your Router settings page.
vertcoin-cli getpeerinfo | Grab the information about the peers you have connected to / are connected to
vertcoin-cli getnettotals | Grab network data, how much downloaded/upload displayed in bytes
tail -f ~/.vertcoin/debug.log | Output the latest lines in the Vertcoin debug.log to see verbose information about the Vertcoin daemon (ctrl+c to stop)
Thank you to all who have helped me and inspired me thus far, @b17z, @jamesl22, @vertcoinmarketingteam, @canen, @flakfired, @etang600, @BDF, @tucker178, @Xer0
This work is dedicated to the users of Vertcoin, thank you for making this possible.
7/20/2018 Thank you @CommodoreAmiga for the incredibly generous tip <3
You can reach me @Sam Sepiol#3396 on the Vertcoin Discord, here on reddit or @ [email protected]
submitted by ecorp-sam-sepiol to vertcoin [link] [comments]

Lightning node setup - estimation (time needed)?

Hi, at work I may try to sell this idea to my boss, to setup a bitcoin lightning node. We have a good infrastructure and it would be quite cool to have a node running on one of our dedicated VMs.

My boss or the person who will approve/deny this idea may ask me of course how much will this cost, in time and money. I didn't do much research yet, but seen several tutorials how to setup a lightning node... thus I may include also the time to do more research...

Here various tutorials I've found so far:
- Detailed guide to installing LND and Bitcoind on Ubuntu 16.04 LTS for Mainnet (this seems very good for ubuntu users)
- Bitcoin Lightning Node on Ubuntu Linux
- The Lightning Network: How to install and (hopefully) make money
- Installing Lightning Network part 2: Here We Go Again
- Bitcoin Lightning Network: run your node at home for fun and (no) profit (explains how to install LND, which saves space as the blockchain doesn't need to be stored locally)

Other resources:
- Bitcoin Core Download (since I use ubuntu I may use the PPA)
- Lightning LND Releases (this still needs to be compiled)

Can you help me estimating this task? I tried to split it into sub-tasks:
- Install Ubuntu Linux on VM, setup SSH, firewalls, basic dependencies: 4h
- Follow tutorial to install bitcoin and lightning daemons: 8h
- Setup/automate backup: 4h
- Documentation (write down notes -if different than existing tutorials- to make things work & share the results): 4h
- Time spent researching, estimating, making an offelittle presentation of the project: 4h

Total estimation: 3 days
- The initial step to download and verify the blockchain (even if in prune mode it won't be stored, this is required) takes a few days

Is this realistic? Did I forget some parts? Should I estimate more time? (I personally tend to underestimate tasks)

Your feedback is welcome, thank you
submitted by firepol to Bitcoin [link] [comments]

Configuring bitcoin full node for faster RPC calls

I have been working with a bitcoin full node and attempting to parse the blockchain data, whilst storing it in an external database.
The script I am using iterates through each block using getblock[hash;2] which populates multiple tables. However in order to get the current blocks input values we have to perform an expensive getRawTransaction each previous txid.
We have singled this out as the bottleneck in the code for most time taken, rendering the script very slow. We have also tried using RPC batching but this also takes considerable amount of time, potentially more with a memory overhead.
I am wondering if there is a best configuration of the daemon to improve RPC call speed? i.e. using rpcthread/queue, increasing dbcache etc.
Another option would be to implement blocks only mode, by reducing the bandwidth could this improve RPC commands?
Bitcoin Core Daemon version v0.16.0.0-g4b4d7eb255
Server Details OS-Ubuntu 16.04 32 GB ram
submitted by dandan4561 to Bitcoin [link] [comments]

[Staking] Reddcoin Core client GUI wallet on a Raspberry Pi Model 3B

This tutorial has been updated: https://www.reddit.com/reddCoin/comments/a0wn1v/updated_staking_reddcoin_core_client_gui_wallet/.
   

Intro

I want to stake Reddcoins on my Raspberry Pi, but there is no easy to install package for the Reddcoin Core client. I found some tutorials (mentioned at the bottom, under 'credits'), but I still struggled to get the result I wanted. It took some small adjustments, but I got the GUI Wallet of Reddcoin Core working on my Raspberry Pi Model 3B. See the steps below. :).
 
If you have any questions or comments, please post a comment in this thread, so others can also benefit from it.
 
If you would like to tip me: RqvdnNX5MTam855Y2Vudv7yVgtXdcYaQAW.
   
Even though Raspbian is the primary OS for the Raspberry Pi, it seems that it's not possible to build and compile the Reddcoin wallet software for Raspbian Stretch. However, I got the wallet compiled using Ubuntu MATE.
     

Overview

     

Steps

 
 
 
 
 
 
 
 
 
 
 
 
 
 
     

Extra

 
 
 
 
     

Credits:

 
Thank you all for sharing your knowledge!
submitted by Yavuz_Selim to reddCoin [link] [comments]

Step by step in staking Redd with Raspberry Pi 3

Before I start, I would like to pay complete credits to these two guys :)
https://www.reddcointalk.org/topic/2679/reddcoin-staking-via-ubuntu-mate-on-raspberry-pi-3-model-b-march-2018 (most of my steps, if not all, are from this link)
https://github.com/joroob/reddcoin/blob/mastedoc/build-arm.md
All the steps I am writing is ABSOLUTELY NECESSARY, please don't try to skip it because I did, and it doesn't work.
step 1: get a Raspberry Pi B https://www.raspberrypi.org/products/#buy-now-modal
step 2: make sure you get proper power supply 5v 2A - the Pi will mine, it will need sufficient power. Regular USB samsung charger will not work.
step 3: get proper micro SD card (SanDisk for example) 32Gb++
step 4: USB + Mouse keyboard
step 5: flash micro SD card with Ubuntu MATE
Download Ubuntu Mate image: https://ubuntu-mate.org/raspberry-pi/
Download Etcher: https://etcher.io
After finishing downloading, use Etcher to write/flash the image on micro SD card
After this, your SD card contains Ubuntu MATE OS.
step 6: Place SD Card into Raspberry Pi 3 and start it up. You should be able to see Ubuntu OS! Congrats!
step 7: Connect to wifi or internet cable (internet is better and faster)
step 8: OPTIONAL - turn off UI OS, so that things will work faster
Open XTerminal:
sudo systemctl disable lightdm.service (to turn UI off) 
in case you want to turn UI on again, run this:
sudo systemctl start lightdm.service (to turn UI on) 
step 9: install all dependencies
sudo apt-get update && sudo apt-get install git build-essential libqt4-dev libprotobuf-dev protobuf-compiler libtool autotools-dev autoconf libssl-dev libboost-all-dev wget pkg-config sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install db4.8 sudo apt-get install libminiupnpc-dev sudo apt-get install libqrencode-dev Reboot 
step 10: add additional RAM (sort of) in case the App need it, this is call "Create Swap file"
sudo fallocate -l 1G /swapfile sudo chmod 600 /swapfile sudo mkswap /swapfile sudo swapon /swapfile echo ‘/swapfile none swap sw 0 0’ | sudo tee -a /etc/fstab 
step 11: Build Berkeley Database
wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar xfvz db-4.8.30.NC.tar.gz cd db-4.8.30.NC cd build_unix ../dist/configure --enable-cxx make sudo make install 
step 11.5: Set BerkeleyDB path
export CPATH="/uslocal/BerkeleyDB.4.8/include" export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib" export LD_LIBRARY_PATH=/uslocal/BerkeleyDB.4.8/lib/ 
step 12: Build Reddcoin Wallet
---download source code ---- only source from joroob/reddcoin will work because some stweak was needed for ARM CPU
cd ~ git clone https://github.com/joroob/reddcoin.git 
---build reddcoin ----
cd reddcoin ./autogen.sh ./configure --with-gui=no --disable-tests cd src make sudo make install 
If you finish this, you are in a great position!!!
step 13: Create reddcoin configuration file
cd ~ mkdir .reddcoin && cd .reddcoin nano reddcoin.conf rpcuser=YOUR OWN USERNAME, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT rpcpassword=YOUR OWN PASS WORD, YOU DONT NEED TO REMEMBER THIS, MAKE IT AS LONG AS YOU WANT 
step 14: Use bootstrap
(At this point, you had a running reddcoin daemon, now you can start staking. But syncing the full chain takes long time.)
cd ~/.reddcoin wget https://github.com/reddcoin-project/reddcoin/releases/download/v2.0.1.2/bootstrap.dat.xz xz -d bootstrap.dat.xz 
step 15: start the reddcoin daemon service cd ~/reddcoin/src ./reddcoind -daemon
After this, you can test if the daemon is working, by perform this command: ./reddcoin-cli getblockcount
step 16: if your app is not able to sync, it is probably the firewall issue with OS, run this to allow port 45444 (used by Reddcoin) and redo step 15
sudo iptables -I INPUT 1 -i eth0 -p tcp --dport 45444 -j ACCEPT sudo iptables -A OUTPUT -p tcp --dport 45444 -j ACCEPT 
step 17: open BEER and enjoy! This is a MUST or the daemon will stop working! I am not kidding!
step 18: Actually, i forgot to mention you need to execute this command for the wallet to stake:
reddcoind walletpassphrase $yourpassword 9999999 true 
ADDITIONAL REMARKS:
From my PC: I am using putty to execute the command, winSCP to monitor the file location on raspberry.
Moving Red Coins out of exchange really a big move, start with normal wallet, don't start with this tutorial :) Ever since I move my coins out of exchange, I am free from all of the ups and downs! Really!
So guys and gals, Redd On!
UPDATE 18 Mar: my first stake has arrived after 6 days staking :)
In case you want to tip me: RaF3TeWqgTzAdnaZQffnsxS74dag13zsAY
Edit 1: Format stuff
Edit 2: Add step 18 to execute staking command.
Edit 3: In case you don't want to compile the source code, you can download my compile version here: https://github.com/hieplenet/reddcoin/releases/tag/v2.0.0.0 (but doing this, you should be aware of the risk of me changing source code for my benefit - I don't change any thing, but you should be cautious, this is the internet :) )
submitted by hieplenet to reddCoin [link] [comments]

How to run a full node on Google Compute for free for a few months (they give $300 credit when you sign up)

Posted this as a comment in another thread but may as well give it its own post, the more the merrier.
You can get a free $300 credit for 365 days if you sign up to Google Compute. More than enough to run a node for several months.
Here's a basic gist:
That's it, enjoy contributing to the network :)
submitted by simonk83 to Bitcoin [link] [comments]

Creating a Headless Staking Node on Ubuntu 18.04

Creating a Headless Staking Node on Ubuntu 18.04
##UPDATE## Step 8 - Option 2, has some bugs in the final build process. i haven't had time to work them out yet!

This guide will take you through building and running a headless x42 Full Node! The OS I am using here is Ubuntu 18.04, this guide picks up from a complete/fresh ubuntu install.
This is meant to setup a staking node and so this guide will run you through building, configuring and setting up staking. It will not cover sending transactions or anything else.
The things we are going to do:
  • Step 1 - Install .net core
  • Step 2 - Download The x42 Node Source & Compile It
  • Step 3 - Setting The x42 Node Up To Run On Boot
  • Step 4 - Setup A New Wallet
  • Step 5 - Configure The x42 Daemon
  • Step 6 - Get Address
  • Step 7 - Check Balance
  • Step 8 - Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node
  • Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node # BROKEN#

Step 1 - Install .net Core

Here is the reference link:
https://dotnet.microsoft.com/download/linux-package-manageubuntu18-04/sdk-current
Register Microsoft Key’s & Install Their repos:
cd /tmp wget -q https://packages.microsoft.com/config/ubuntu/18.04/packages-microsoft-prod.deb sudo dpkg -i packages-microsoft-prod.deb sudo add-apt-repository universe sudo apt -y install apt-transport-https sudo apt update sudo apt -y install dotnet-sdk-2.2 
Microsoft collect telemetry data by default, if you are part of the “tin foil hat brigade” you can set the following environment variable to turn it off:
echo "DOTNET_CLI_TELEMETRY_OPTOUT=1" >> /etc/environment 
now you should be at a point where .net core is installed on your system… that wasn’t so hard was it! You can check by running the following command:
dotnet--list-sdks 
The output should look like this:
$ dotnet --list-sdks 2.2.103 [/usshare/dotnet/sdk] 

Step 2 - Download & Compile The x42 Node

This part assumes you have GIT installed, if not:
apt -y install git 
Now to pull down the source and compile it!
cd ~/ git clone https://github.com/x42protocol/X42-FullNode.git # “cd” into the source folder cd X42-FullNode/src/ 
Now .net core uses NuGet for package management, before we compile, we need to pull down all of the required packages.. its as simple as running (this will take a couple of minutes) inside of “X42-FullNode/src/”:
dotnet restore 
now we are ready to compile the source, execute (inside of “X42-FullNode/src/”):
dotnet build --configuration Release 
ignore the yellow warnings, this is just the rosyln compiler having a grumble.. if you get red ones then something went wrong! The “--configuration Release” will strip out all debug symbols and slim things down.. only a little, this optional parameter is not mandatory.
Once this is done everything is built/compiled, you can run the daemon directly from the repository, this can be done by going to:
cd ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1 dotnet x42.x42D.dll 
this will kick off the node, however if you exit SSH at this time it will kill the process! however I always recommend copying out the binaries to a separate folder. This can be done with the following:
mkdir ~/x42node mv ~/X42-FullNode/src/x42.x42D/bin/Release/netcoreapp2.1/*.* ~/x42node/ 
now we have everything we need to run the node outside the git repository! What we need to do now is run the node and have it create the default x42.conf file.. so
cd ~/x42node dotnet x42.x42D.dll 
feel free to hit “CTRL + C” to exit the application after a couple of seconds, by then the folders/files would have been created at the following path:
~/.x42node/x42/x42Main/ 

Step 3 - Setting The x42 Node Up To Run on Boot

Now we are going to create a service file so our x42 node automatically starts when the system is rebooted.
THINGS TO NOTE ABOUT BELOW.. CHANGE THE ##USER## to the username your currently using as these files are within your home directory!
We need to drop to root for this..
sudo -i cat < /etc/systemd/system/x42node.service [Unit] Description=x42 Node [Service] WorkingDirectory=/home/##USER##/x42node ExecStart=/usbin/dotnet /home/##USER##/x42node/x42.x42D.dll Restart=always # Restart service after 10 seconds if the dotnet service crashes: RestartSec=10 SyslogIdentifier=x42node User=##USER## Environment=ASPNETCORE_ENVIRONMENT=Development [Install] WantedBy=multi-user.target EOF 
To enable the service, run the following (as the root user):
systemctl enable x42node.service 
BOOM.. the node isn’t running yet.. but next time the system restarts it will automatically run!
now lets exit out of root!
exit 
We can now start the node up and begin downloading blocks, by running the following command:
sudo systemctl start x42node.service 
if you want to check its loaded and see some of the output, you can run:
sudo systemctl status x42node.service 
an example of the output:
$ sudo systemctl status x42node.service ● x42node.service - x42 Node Loaded: loaded (/etc/systemd/system/x42node.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2019-01-24 15:47:55 UTC; 14s ago Main PID: 5456 (dotnet) Tasks: 23 (limit: 1112) CGroup: /system.slice/x42node.service └─5456 /usbin/dotnet /home/darthnoodle/x42node/x42.x42D.dll Jan 24 15:48:09 x42staking x42node[5456]: Batch Size: 0 Mb (0 headers) Jan 24 15:48:09 x42staking x42node[5456]: Cache Size: 0/50 MB Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: =======Mempool======= Jan 24 15:48:09 x42staking x42node[5456]: MempoolSize: 0 DynamicSize: 0 kb OrphanSize: 0 Jan 24 15:48:09 x42staking x42node[5456]: Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:86.184.76.255]:52342' connected (outbound), agent 'x42:1.2.13 (70012)', height 213920 Jan 24 15:48:09 x42staking x42node[5456]: info: Stratis.Bitcoin.Connection.ConnectionManagerBehavior[0] Jan 24 15:48:09 x42staking x42node[5456]: Peer '[::ffff:86.184.76.255]:52342' offline, reason: 'Receiving cancelled.'. All node screen output can be found in the /valog/syslog file. 

Step 4 - Setup a New Wallet

With the Node running, we now need to setup and/or restore a wallet!
Everything will be performed through the API’s, however by default these API’s are listening on localhost (127.0.0.1), if you are connecting in remotely then this would be a problem since you cant hit that IP. The solution, SSH TUNNEL!
Execute the following command on your local system:
ssh -L 42220:localhost:42220 @ 
This binds the local port (on your system) with 127.0.0.1:42220 on the remote system, once you have executed the command you can type the following address in your laptop/desktop’s web browser and be able to access the API’s:
http://127.0.0.1:42220/swaggeindex.html 
It should look something like this:
https://preview.redd.it/9lzeg3vob8d21.jpg?width=482&format=pjpg&auto=webp&s=b5d574998816056140d5d6de7b03c56772a892fe
To Create a new wallet, first we have to generate some mnemonic works (e.g. the seed), you can do that by going to the following API:
/api/Wallet/mnemonic 
Hit the “Try it out” button which then prompts you for 2 fields:
https://preview.redd.it/dvbdllfrb8d21.jpg?width=722&format=pjpg&auto=webp&s=766d14bafba6facbcd56d31c63c0012748e682e5
Enter “English” and I would recommend 24 words as this greatly increases the seed strength! Once that is done you hit execute and then scroll down to see the “Response Body”, this should contain the mnemonic which you are going to use to create the wallet! This looks something like below:
https://preview.redd.it/6p4q0rsub8d21.jpg?width=603&format=pjpg&auto=webp&s=44b9265626467a43ca670b134c4d28187f475c2e
THIS IS VERY IMPORTANT, BACKUP THIS MNEMONIC TO A SAFE SECURE LOCATION THAT IS ENCRYPTED!!!
So now we have our mnemonic, its time to generate the wallet, for this we need to use the API:
/api/Wallet/create
There are a number of parameters which are required in order to create a wallet:
WalletCreationRequest{ mnemonic string password* string passphrase* string name* string } 
It should be noted that the password and mnemonic are is the most important parts of this request where the “password” will encrypt the wallet and Is required to unlock it.
  • Hit the “Try it out” button
  • input the necessary data
  • Insert the mnemonic
  • Put a password & passphrase
  • “Name” is what your wallet will be called
It should look something like the following:
https://preview.redd.it/958ttfbxb8d21.jpg?width=603&format=pjpg&auto=webp&s=ce48336436ea4b469b5e87513da802de0bf444ee
Hit “Execute”, the “Loading” sign may spin for a few minutes while the wallet is created… once the wallet has been created the “Response Body” will return the mnemonic you have just used.. we now have a wallet!!
HOWEVER IT IS NOT LOADED INTO THE NODE JUST YET!
This is where we will now jump back out and to configure the node to automatically load the wallet and automatically start staking when it first loads.
AGAIN BACKUP YOUR MNEMONIC AND PASSWORD, MAKE SURE THEY ARE ENCRYPTED AND STORED SOMEWHERE SAFE!

Step 5 - Configure The x42 Daemon

Now we are going to modify the x42.conf file in order to automatically load our wallet and start staking 😊
First things first, lets stop our node by running the following command:
sudo systemctl stop x42node.service 
CD to the following folder and view its contents:
~/.x42node/x42/x42Main ls -lah 
within that folder there should be 2 files you are interested in:
-rw-r--r-- 1 darthnoodle darthnoodle 18K Jan 28 16:01 TestWallet.wallet.json -rw-rw-r-- 1 darthnoodle darthnoodle 3.1K Jan 24 15:25 x42.conf 
So TestWallet.wallet.json is our physical wallet that will be loaded, but for right now we want to modify the x42.conf file.. fire up your favourite text editor (if you use VI you’re a masochist)..
nano x42.conf 
The area we are interested in is the following:
####Miner Settings#### #Enable POW mining. #mine=0 #Enable POS. #stake=0 #The address to use for mining (empty string to select an address from the wallet). #mineaddress= #The wallet name to use when staking. #walletname= #Password to unlock the wallet. #walletpassword= #Maximum block size (in bytes) for the miner to generate. #blockmaxsize=1000000 #Maximum block weight (in weight units) for the miner to generate. #blockmaxweight=1000000 #Enable splitting coins when staking. #enablecoinstakesplitting=1 #Minimum size of the coins considered for staking, in satoshis. #minimumstakingcoinvalue=10000000 #Targeted minimum value of staking coins after splitting, in satoshis. #minimumsplitcoinvalue=10000000000 
Uncomment (remove the #) of the following lines and change their value:
stake=1 (changed to 1) walletname=TestWallet (changed to our Wallet Name) walletpassword=password123 (changed to the wallet password) 
save the file and exit back to the command prompt, now we shall restart the node with the following command:
sudo systemctl status x42node.service 
now the wallet is automatically loaded and ready for action!
YES I KNOW YOU HAVE PUT YOUR PASSWORD IN CLEARTEXT, THIS IS WHERE YOU SHOULD HARDEN YOUR BOX. IF THEY CAN GET TO THE POINT WHERE THEY CAN READ YOUR CONF FILE THEY CAN JUST GRAB YOUR WALLET AND BRUTEFORCE THE PASSWORD.
You can check its loaded by going back to the API and executing the following command:
/Dashboard 
Or execute the following command on the NODE:
curl -X GET "http://127.0.0.1:42220/Dashboard" -H "accept: application/json" 
both will produce the same output, if you scroll to the bottom you should see something like this:
======Wallets====== TestWallet/account 0, Confirmed balance: 0.00000000 Unconfirmed balance: 0.00000000 
This means the wallet is loaded and ready for action!!

Step 6 - Get Addresses

Next thing you are probably going to want is a receive address and to check the balance and TX history.. so lets start with getting an address!
Go to the following API:
/api/Wallet/unusedaddress 
Fill in the Wallet name which is “TestWallet” (in this example) and “account 0” (which is the first/default account):
https://preview.redd.it/ayri5jk0c8d21.jpg?width=602&format=pjpg&auto=webp&s=2d16bbb78da49c0125d24d0834c9454d702cb7a1
Hit execute and you should have an x42 address within the “Response Body”:

https://preview.redd.it/tmc495j3c8d21.jpg?width=349&format=pjpg&auto=webp&s=b00177f66a9e24c980d3c6d4e532a33cbf3fb0bc
BOOM… ok now we can receive funds! 😊

Step 7 - Check TX History

Go to the API and the following call:
/api/Wallet/history 
The 2 fields we are most concerned about are:
https://preview.redd.it/lw194af6c8d21.jpg?width=602&format=pjpg&auto=webp&s=27e264bc008879355ff5b9c50a0a5cb06f16e960
Input the name of the wallet and account you want to view the history of, then hit execute. The other fields can be black. This will return a list of TX’s that the wallet has received:
This should look like the following:
https://preview.redd.it/x1hgargac8d21.jpg?width=585&format=pjpg&auto=webp&s=4fd25f22772f4bcec523a6e82b321ae8146a2c75
There is an easier way of doing this, that doesn’t require you to be connected to your node.. especially if your only interested in viewing your staking rewards… THE EXPLORER!
Access the following URL:
https://explorer.x42.tech/address/ 
this will allow you to easily see all TX’s associated with this address, it should look something like below:
https://preview.redd.it/e480grscc8d21.jpg?width=601&format=pjpg&auto=webp&s=0f8a9ebc7944dfcc73f7df659bd839bb983ba90c
… and your done! By this point your node should be running, staking and you have an easy way to view transactions/rewards 😊


Step 8 - Connect The UI Wallet To A Headless Node

The UI utilises a combination of technologies, however the important part is the code attempts to access the x42 Node API on 127.0.0.1:42220.
So you have 2 options here:
  1. Download the Wallet Installers
  2. Compile The UI Yourselves
Pick the option that best suits you given the pros/cons below:
Option 1 - Pro's/Cons
Pro's
  • If you use the installer, its quick and easy.
Cons
  • This also installs an x42 node on your system which runs when the UI loads.
  • If you dont setup an SSH tunnel before running the wallet the local node will bind to the port and the tunnel wont work.. you will be connecting to the local wallet!!
Option 2 - Pro's/Cons
Pro's
  • You only run the UI, the x42 node is not installed
  • you dont have a superfluous node running, downloading blocks on your local system
Cons
  • Time Consuming
  • Have to download dependencies and manually compile the code

Pre-Requirement - Needed For Both Options!!
As previously mentioned, the UI attempts to access the API's on 127.0.0.1:42220, however our node isnt running on our local system. IN ORDER TO GET IT WORKING YOU NEED TO HAVE AN SSH TUNNEL, THIS TUNNEL NEEDS TO REMAIN ACTIVE WHENEVER YOU WANT TO ACCESS THE WALLET.
this can be done by executing the following command:
ssh -L 42220:localhost:42220 @ 


Step 8 - [Option 1 - Use Installer] Connect The UI Wallet To A Headless Node

Download and install the UI/Wallet & Node from:
https://github.com/x42protocol/X42-FullNode-UI/releases

DO NOT RUN THE WALLET YET!
Those of us who dont want to run a local node and just want the UI, execute the following commands (as an administrator):
cd C:\Program Files\x42 Core\resources\daemon\ ren x42.x42D.exe x42.x42D.exe.bak 
The above is with Windows, if your are in *NIX then locate the daemon and rename it (i will update how to do that/where to find it shortly)
Setup the SSH tunnel as outlined above, Execute the wallet and it will load, however you will see an exception:

https://preview.redd.it/9os5h8q7scd21.jpg?width=550&format=pjpg&auto=webp&s=ac45ed7bc987917142075c61fb486e7d71f820d1
dont worry, this is just the wallet trying to execute/start the x42 node which we dont want, if all works according to plan.. after you click "OK" you should now be presented with the wallet UI and have the option to select what wallet you would like to load:

https://preview.redd.it/hnyt0b4mscd21.jpg?width=958&format=pjpg&auto=webp&s=a47df710a804375d8363ffcd77d1ede2862b9b4d
... DONE!

Step 8 - [Option 2 - Build/Compile UI Only] Connect The UI Wallet To A Headless Node ###BROKEN

THIS IS STILL A WORK IN PROGRESS, THE ELECTRON BUILD DOESNT WANT TO COMPILE BECAUSE SOME CODE IS MANGLED SOMEWHERE!!

Ok, this is the fun bit! .. we need to install the following dependencies. these instructions are written for a Windows system but it should be easy enough to perform the same on a *NIX system.
Install Dependencies
In order to build the wallet UI, you need to install the following components:
  • git
  • NodeJS
  • Electron Builder
First thing you need to do is install git, so download and install the package:
https://gitforwindows.org/
Next you need to install NodeJS, download and install the package:
https://nodejs.org/en/download/
Next we need to install the node package manager:
npm install npx –verbose 
next we need to make sure we have Visual Studio build tools and Python (2.7) installed, this can be done by executing the following (AS AN ADMINISTRATOR!):
npm install -g --production windows-build-tools 
this will install the necessary tools to build C#/C++ code and python 2.7, this could take some time! When its done you should have something like the following;

https://preview.redd.it/5ekfy5g1kcd21.jpg?width=490&format=pjpg&auto=webp&s=f65196dee6f78f2ececec5ee8b5df1044d68f635

Build & Install - Windows
Create a temp folder to navigate to a folder where you want to download the GIT repository, execute the following command:
git clone https://github.com/x42protocol/X42-FullNode-UI.git 
This will clone the repository into the folder, it will only clone the wallet and not the Node source! now lets CD into the folder and build the UI:
cd X42-FullNode-UI\FullNode.UI npm install 
This will download and install all dependencies (can take a while), at the end you should see something like..

https://preview.redd.it/0zfbfxa8kcd21.jpg?width=601&format=pjpg&auto=webp&s=438d072a6ab2bc7a3d84a8dfe773968acc762bc7
Now the stock UI has a number of third-party libraries which contain some vulnerabilities, being a security conscious person, ive also run:
npm audit fix 
when this is done, we have fixed most of the package vulnerabilities 😊 We also get a complaint about the typescript library being too new for the version of angular in use, so run the following command to install the additional dependency:
npm install [email protected]">=2.4.2 <2.7.0" 
now its time to build the UI, execute the following:
npm run build:prod 
once complete you should see something like the following..

https://preview.redd.it/56vf9zfckcd21.jpg?width=601&format=pjpg&auto=webp&s=31b72daff9ab5001843cba529a7bd38c76fd099d
Next its time to compile the electron binary, it should be noted that the build/package process utilises AppVoyer which is not installed and if you attempt to build right now you will get the following error:
cannot expand pattern "${productName}-v${version}-setup-${os}-${env.arch}.${ext}": env arch is not defined. 
To fix this we need to modify the build file, this is a quick one liner that can do it:
powershell -Command "(gc electron-builder.json) -replace 'env.arch', 'arch' | Out-File electron-builder.json" 
Essentially the offending line for Windows is..
"artifactName": "${productName}-v${version}-setup-${os}-${env.arch}.${ext}" 
The build cannot resolve “env.arch”, so the above one liner replaces “env.arch” with “arch” which works 😊
execute the following command:
npx electron-builder build --windows --x64 
At present i get the following error, no matter what i do.. and ive ran out of time to go hunting about.. if anyone has any ideas on how to fix then please post in here or message me on discord:

https://preview.redd.it/t66rtuqdtcd21.jpg?width=918&format=pjpg&auto=webp&s=a3f1a5ff682586348909c67645ca7ae9454922ff


Happy staking!

If you found this post helpful, then buy me a beer and send a donation to XQXeqrNFad2Uu7k3E9Dx5t4524fBsnEeSw
submitted by D4rthNoodle to x42 [link] [comments]

Steps to move 2of2 with ntimelock.zip

EDIT: this is about moving bcash coins, not the normal BTC.
Finally, I moved BCH coins off greenaddress so that I can dump them.
I’d like to thank: ‘dumpyourbcash’ https://github.com/dumpyourbcash/garecovery
Jeremy Kauffman ‘jkauffman1’ https://github.com/greenaddress/garecovery
Alex Perev https://github.com/AlexPerev/garecovery
Without their works prior, I won’t be able to move BCH today.
This write up is just for my scenario, my profession is mostly databases and web-based technologies. I only picked up python since the recent BCH run up which gave me enough incentive to dump them.
I spent some spare time to figure out the following steps. It worked for me, and it does not mean I went on the shortest path. Some steps could well be optional, but I list them here in case things not working out, and these steps could help you move further. Be aware this guide is all done in Linux terminal, no GUI involved, and assume you have basic knowledge using Linux and vim editor.
My scenario is the following:
Software needed:
Hope this can help some to get bcash out, it still has some value at this moment 😊
Donations are welcome.
BTC: 3HajumDneidRxGk5s99bBB7WCrCsPxpQZ5 BCH: 1LEvtKNEDMDYMAUQDLZwQLYjAEgsRBcnCz 
submitted by RaggiGamma to greenaddress [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

How to compile UASF from source on Ubuntu 16.04

In case anyone want's to run their own UASF node on a Ubuntu 16.04 VPS, here's how:
sudo apt-get -y install build-essential sudo apt-get -y install autoconf automake libtool pkg-config sudo apt-get -y install libdb4.8++-dev libboost1.58-all-dev libssl-dev libevent-dev git clone --branch 0.14-BIP148 https://github.com/UASF/bitcoin.git cd bitcoin ./autogen.sh ./configure make sudo make install bitcoind -daemon 
If you just want to run a node to announce UASF, but not actually support it:
sudo apt-add-repository -y ppa:bitcoin/bitcoin sudo apt-get -y update sudo apt-get -y install bitcoind bitcoind -uacomment="UASF-SegWit-BIP148" -daemon 
EDIT: Modified git line based on yMartin1's correction. Thanks for looking out!
submitted by noobbtctrader to Bitcoin [link] [comments]

Bitcoin Core & Lightning Network (very easy installation!) No root access!

Hi!
I finished the fine tools as i think
I created Makefile utilities for bitcoind & lnd compilation under $HOME directory (no root access!)
This makefile does everything for full bitcoin node and lightning network node. This kit was created for CentOS 6.* but it works in Ubuntu / Linux Mint OSes too and may be will work in 90% Unix systems.
Details:
It compiles from sources under $HOME directory: compilers (gcc 7.1, go, node.js, python2 & python3) and tools (autoconf & autotools and etc), all libraries (boost, openssl and more), bitcoind daemon, lnd daemon , lncli-web client (and node.js for this) and does all configuration for you! You need only create a wallet in lnd. It works fine with UPnP routers (from sources too!) and can define network configuration (real public IP & network interfaces)
So if you want to have bitcoind & lnd node you need only to do:
make i-want-lightning
make set-up-lightning-mainnet
And after you can run:
mainnet-lightning-start
And after you will have bitcoind full node & lnd node with web interface (lncli-web)
You can setup in one host mainnet & testnet daemons without any conflicts.
Enjoy!
URL: https://github.com/Perlovebitcoin-kit-makefile
Perlover
submitted by Perlover to Bitcoin [link] [comments]

Solo mining for Gits and Shiggles

I run a full Bitcoin node. Lately I've been playing around with setting up solo mining with BFGMiner, just experimenting with CPUs and GPUs, in full knowledge its a purely academic thing with zero chance of succeeding, intending only to deepen my understanding of the system. Seems to work well, for the most part.
Except when I point my S9's at the pool, I only get about 250 GH instead of 13.5 TH each. I've made sure to turn off overt asciboost when I point them at my experiment, no effect, and they definitely are connected. Does anyone else play around with this stuff and might know the solution already?
FWIW: Ubuntu Bitcoin Core v0.17 BFGMiner v5.5.0
Bitcoin.conf, server, daemon, listen, and txindex set to 1. rpcuser and rpcpassword are set, rpcallowip and rpcport are all good(and proven as I can connect other pcs over the LAN just fine for cpu/gpu)
BFGMiner -o http://127.0.01:8332 -u user - pword --generate-to $address --coinbase-sig "LOL" --stratum-port:3333
Any suggestions?
submitted by NDragon951 to BitcoinMining [link] [comments]

I am now running Bitcoin Unlimited - How to change over your Ubuntu node in 5 minutes

If you, like me, are not running Bitcoin Unlimited at least in part because you think it might be difficult to do so, let me assure you it is very easy. I was surprised to learn BU has an Ubuntu repository. The commands below worked for me to remove my previous Bitcoin client and replace it with BU. The blockchain and database is untouched so you will NOT need to redownload the blockchain. I was up and running again in minutes.
bitcoin-cli stop sudo apt remove bitcoind sudo rm /etc/apt/sources.list.d/bitcoin-ubuntu-bitcoin* sudo add-apt-repository ppa:bitcoin-unlimited/bu-ppa sudo apt update sudo apt install bitcoind bitcoind -daemon 
Your mileage may vary depending on your specific setup. Hope this helps someone!
EDIT 1/17/18: The above instructions will configure the Bitcoin Core version of Bitcoin Unlimited. If you want Bitcoin Cash, you need to use the repository ppa:bitcoin-unlimited/bucash INSTEAD of ppa:bitcoin-unlimited/bu-ppa.
submitted by Hewbacca to btc [link] [comments]

NicNacCoin using the daemon as onboard explorer Komodo daemon Install guide (Ubuntu 16.04) - KOR Tuto : Install Coin (VERGE-XVG) on Yiimp (with Compil Daemon) how to install bitcoin core wallet on google cloud ubuntu - terminal version Lightning Network - Setup LND Nodes on Windows/Ubuntu in 30mins

Ich bin versucht, setup, Drupal e-commerce-Lösung mit einem payment-gateway zu akzeptieren Bitcoins beim bezahlen, aber ich brauche eine bitcoin-daemon installiert. Wie gehe ich über die Installation der Bitcoin-daemon in meinem CentOS - installation? Gibt es eine Schritt-für-Schritt-Anleitung, was muss ich eingeben um dies zu installieren? Bitcoin Core Daemon im Userspace häuslich einrichten und starten. Wer hier noch als Admin oder root eingeloggt ist, sollte sich ausloggen und als der Benutzer einloggen, unter dem später der Bitcoin Core Daemon laufen soll. Es wird dringend davon abgeraten, den Daemon als root (bzw, mit root-Rechten) laufen zu lassen! The Ubuntu PPA has been updated with packages for Bitcoin Core 0.9.1. Ironically, they make the upgrade warning go away, but they do not fix the problem! The Bitcoin Core packages for Ubuntu do not include a dependency on a fixed version of the OpenSSL libraries. Therefore, if you have not upgraded OpenSSL on your Ubuntu system, you will still ... Install Bitcoind Ubuntu. GitHub Gist: instantly share code, notes, and snippets. Skip to content . All gists Back to GitHub Sign in Sign up Sign in Sign up {{ message }} Instantly share code, notes, and snippets. rjmacarthy / bitcoind-ubuntu-install. Last active Sep 3, 2020. Star 41 Fork 22 Star Code Revisions 9 Stars 41 Forks 22. Embed. What would you like to do? Embed Embed this gist in your ... To use the Bitcoin Core daemon (bitcoind), ... Ubuntu also comes with its firewall disabled by default, but if you have enabled it, see the Ubuntu wiki page for information about adding port forwarding rules. Once you have allowed inbound connections to port 8333, start Bitcoin Core (if you haven’t already) and follow the Testing Connections instructions to test your connection. If something ...

[index] [21280] [19302] [10409] [8169] [49305] [45193] [37797] [40919] [33842] [13345]

NicNacCoin using the daemon as onboard explorer

Tuto : Install Coin (VERGE-XVG) on Yiimp (with Compil Daemon) This video just shows the installation of the coin. The configuration of yiimp and coin require a minimum of knowledge in linux Some ... 영상에서 사용한 명령어 내용 https://goo.gl/hm7pwh. This video is demonstration of how to use the daemon as an explorer to verify block, hash and transaction tx information. Donations Accepted: https://goo.gl/ei77oA Website Https://nicnaccoins.com ... Tuto : Install Coin (FuturoCoin-FTO) on Yiimp (with Compil Daemon) This video just shows the installation of the coin. The configuration of yiimp and coin require a minimum of knowledge in linux ... Bitcoin JSON-RPC tutorial. How to set up bitcoind on a VPS. BTC: 1NPrfWgJfkANmd1jt88A141PjhiarT8d9U

#